Installing as an OpenShift application#

The ID that you use to install the product must be able to make changes to the host environment. The tools required by all installation scenarios include the following items:

In addition to the requirements for all installation scenarios, you need the following items:

Get a key. The key enables you to complete installation. Visit the UrbanCode Velocity web portal to obtain your key. After completing the form, you can copy the access key. Store the key in a readily-available location; you use it during installation.

Note: Make sure that you select a key for the product version that you want to install. Keys for the Standard Edition do not work with the Community Edition and vice-versa.

You will install UrbanCode™ Velocity into a OpenShift project. During installation, you configure a MongoDB for your project, add the UrbanCode Velocity service to your OpenShift project catalog, and create a route that makes the UrbanCode Velocity application publicly accessible.

If you need to change project parameters, modify the velocity-se-<version number>-openshift.yaml file. UrbanCodeVelocity uses this file to configure the OpenShift project. The velocity-se-<version number>-openshift.yaml file is copied to your local environment during installation.

  1. Download the installation file for your environment.

    Note: For macOS and Linux installations, set the appropriate permissions before running the file: sudo chmod +x.

    Visit the FlexNet download center and select the file for your environment. Or you can download the installation file diretly from the following URLs:

  2. At the Please enter your Velocity access key prompt, enter your SE version access key.

    If you previously installed an SE version, the already-configured key is the default value.

    Note: Make sure that you enter the key for the right version.

  3. Complete local installation by responding to the prompts described in the following steps.

    When the script starts, you are prompted to accept the license. You can explicitly accept the license without viewing it by appending the following parameter to the command:

    ./<velocity-installation-file\> **--license=accept**

    1. At the Choose the platform prompt, select OpenShift.

    2. At the Enter the location where the Velocity files will be installed prompt, specify where to put the installation files.

    3. At the Openshift Project Name prompt, enter the name of the project you created earlier.

    4. At the Name of installation user prompt, enter your OpenShift ID.

    5. At the Choose one prompt, select Install new instance.

      If you are upgrading, see Upgrading OpenShift installations.

    Files that you use to complete installation are copied to the specified directory.

  4. From the directory where you installed the product files, run the oc apply -f pre-install.yaml.

    The user property in the pre-install.yaml file defaults to 'admin.' Make sure the user property contains the correct OpenShift user ID.

  5. If you need to enforce limits on resources, modify the containerRuntimeExecutor parameter in the velocity-version-openshift.yaml file, which is in the installation directory.

    For example, to limit ephemeral Argo pods, you might use the following parameter values:

    ... data: config: | containerRuntimeExecutor: kubelet namespace: velocity executor: resources: limits: cpu: 1 memory: 2Gi requests: cpu: 50m memory: 512Mi

  6. From the OpenShift dashboard, create a project for UrbanCode Velocity.

    When the project is created, in the My Projectsarea, select the project, and then click Browse Catalog.

  7. Install the UrbanCode Velocity service template in the project catalog by completing the following steps:.

    1. From the OpenShift project catalog, use the Add to Project > Import YAML/JSON command, and then import the velocity-se-<version number>-openshift.yaml file.

      The yaml was installed in the previous step.

    2. Select Create, and then uncheck Process the Templateand check Save Template.

      After refreshing the browser, you see the UrbanCode Velocity service in the OpenShift project catalog.

  8. Create a MongoDB service for the project by completing the following steps:

    1. From the OpenShift project catalog, select MongoDB.

    2. On the MongoDB configuration page, click Next, and then, in the MongoDB Admin Password field, enter a password for admin user.

      You can accept the default values for the other parameters.

      Note: The user must be the admin user, not the MongoDB user.

    3. Click Create.

    4. On the MogoDB has been created page, copy the Connection URL string and store it in a readily-accessible location, then close configuration window.

      You use the connection string to configure your UrbanCode Velocity project.

  9. Create an UrbanCode Velocity service by completing these steps.

    1. From project catalog, select Velocity OpenShift Catalog.

      The Velocity configuration window is displayed.

    2. Click Next, and then, in the Name field, enter a service name.

    3. In the Hostname field, enter the service host name.

      The host name must resolve to a name on your DNS server, or in the server's hosts file. On Linux, the file location is etc/hosts; on Windows, the location is C:\Windows\System32\drivers\etc\hosts.

      Note: The Hostname cannot be an IP address.

    4. In the Access Key field, paste the UrbanCodeVelocity access key received earlier.

    5. In the Mongo URL field, paste MongoDB connection string for the MongoDB service.

      Do not use the default user or database name. Use the admin user and password you created for the admin. For example:


      Note: When you copy the sample connection code, make sure that you delete the sampleDB part from the copied code.

      If you connect to an authenticated MongoDB database, you can use authSource to specify the database where authenticated users are defined. For example, if the admin user is defined in the admin database, you can use mongodb://root:password@velocity-mongo-mongodb?authSource=admin. If you do not want to use the admin user, log on to the MongoDB and use a command similar to this one to grant admin permissions to the user:


      db.grantRolesToUser( "mongo", ["readWriteAnyDatabase", "dbAdminAnyDatabase", "clusterAdmin"] ) ```

    6. Accept the default values for the other parameters and click Create.

  10. Create a route by completing the following steps:

    1. From project dashboard, click Applications > Routes > Create Route.

    2. In the Name field, provide a name for the route.

    3. In the Hostname field, enter the host name you specified earlier for UrbanCodeVelocity.

    4. In the Service field, select the velocity-router service.

    5. Check Secure route.

    6. From the TLS Termination list, select Edge.

    7. Upload your PEM-format certificate or, on the Insecure Traffic list, select Allow.

    8. Click Create.

    The new route is listed on the Routes page.

After the installation is complete, open UrbanCodeVelocity by clicking the route name link. The default user name is admin and the default password is admin.

Parent topic: Installation